Mavros Ultra Grun RCA
Rated 3.5/5 based on 11 customer reviews

Mavros Ultra Grun RCA

  • Product SKU: MAV-IC-RCA-0.5
$1,250.00
  per pair
Hurry! only 0 left in stock!

Need a custom length or termination? No problem. Request it here.

RCA interconnect cable based on the same design objectives and manufacturing techniques developed for our flagship Asimi range, utilizing copper rather than silver conductors.

The Mavros Ultra RCA has been designed from the ground up to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer with minimum susceptibility to spurious interference. Termination is with our low-mass, high bandwidth, cold-weld Ultra RCA connectors, which have minimal effect on the integrity of the signal.

The Mavros Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality.

In the manufacture of Mavros, we maximize the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.

RCA interconnect cable based on the same design objectives and manufacturing techniques developed for our flagship Asimi range, utilizing copper rather than silver conductors.

The Mavros Ultra RCA has been designed from the ground up to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer with minimum susceptibility to spurious interference. Termination is with our low-mass, high bandwidth, cold-weld Ultra RCA connectors, which have minimal effect on the integrity of the signal.

The Mavros Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality.

In the manufacture of Mavros, we maximize the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.

The cable consists of a pair of conductors, each made up from six bundles of 12 multi-conductor wires, plus a thicker centre wire. This in turn is covered by a continuous copper/Mylar™ electrostatic screen with copper shielding braid, ensuring minimal susceptibility to RF interference and noise.

heoretically, the best dielectric (insulation layer) is air. Conventional dielectric (insulation) materials impose their own signature distortion and loss on the signal. Our technique uses a microporous PTFE (Teflon™) tape, which is wound around the core conductors, then covered again and stabilised using a protective FPE (Flexible PolyEthylene) dielectric. This process maintains the required conductor geometry, and bestows greater manufacturing consistency.

Hi-Fi News — Editor's Choice

"Atlas’s Asimi Ultra had already dispelled the myth that all silver cables sound ‘bright’ but the copper-infused Mavros Ultra succeeds in sounding smoother still. It helps instil a settled quietness to musical backgrounds, the system sounding free of grit and grain and yet not so luxuriant or sweet that the shimmering edge of percussion or brass is polished away. "

Link

Hi-Fi World — 5 Stars/Outstanding (2015)

"Naturally, Atlas recommends the use of its Mavros interconnects with its Mavros speaker cable. With both in place the system took on a whole new dimension, offering greater space, depth, dynamics and fluidity. These new Mavros cables from Atlas have the uncanny ability to sound fast yet relaxed, detailed yet refined, fluid yet composed."

Link

Hi-Fi World — 5 Stars/Outstanding (2013)

"What is remarkable about these cables is how much detail is presented without having to ramp up the upper mids to bright levels. The confidence of the cables, in terms of presentation, is quite remarkable."

Link

Geometry: Twin multicore dual drain

Conductor: 6N OCC Copper

Dielectric: Microporous PTFE (Teflon™)

Screen: Braid + Mylar™, 100%

Capacitance: 48.92 pF/m

Inductance: 0.7256 µH/m

Resistance: 0.0181

VOP: 0.81

Outside Diameter: 9.8mm

Processing & Shipping Times

Atlas is distributed in the USA and Canada by VANA Ltd. We keep a small subset of standard lengths in stock in our New York warehouse. Online orders are processed within 2 business days. Orders than can be fully or partly fulfilled from our stock will usually ship within 3 business days. You can also inquire about inventory with your local Atlas Cables dealer. 

Custom orders and lengths that are not currently in stock will be made to order in Scotland and drop-shipped to your door. These typically ship within a week and arrive to their North American destination within 2 weeks.

Note: Fulfillment times for custom may currently be longer due to the COVID pandemic. Please contact us for an estimate if your order is time-sensitive.